Conservation compendium. Part 3: Historic wrought iron, cast iron and mild steel

Some masonry design in the UK uses concrete blocks. BS EN 1996 (Eurocode 6) covers the design of masonry for buildings and civil engineering works and is organised into four parts. This design guide covers vertical load design (strength and eccentricity) and concentrated loads.

This article sets out typical structural issues encountered when dealing with churches and places of worship.

Historic buildings and structures, like any other, move to some degree, whether due to thermal effects, changes in moisture levels in the structural fabric, influences on the founding subsoil, or environmental forces. The key question for the conservation engineer is to determine whether the movement is progressive and presents a risk to the structure. This article introduces engineers to the various techniques available to monitor movement in historic structures, from simple manual techniques which are less commonly used today, to sophisticated electronic systems. The form of monitoring will depend on the nature of the assumed movement, the funds available, and the possible consequences if the movement is progressive.