Tag
Author
Date published
Price

Contents page

The Structural Engineer

The Paper describes the renewal of the inner rail-troughs and the buckled plating of the floor of the bridge, the strengthening of the cross transoms of the internal viaducts, and the provision of additional cross bracing between the main girders of the approach spans. The rails which form the up and down lines on the bridge are carried on timber waybeams, laid in four continuous steel troughs. The two outer troughs form the top boom of the main girders of both the north and south approach spans and the internal viaducts. The two inner railtroughs, on the other hand, are carried on cross transoms which span between, and connect to, the side plates of the top booms of these girders. From bay 4 of the cantilevers, where the internal viaduct terminates, to the ends of the cantilevers and accoss the central spans, the four troughs are carried on cross transoms spanning between the bottom booms of the cantilevers and the main girders of the central spans. William Alexander Fraser

Publish Date – 1 January 1923

The Structural Engineer

The following article is the outcome of an argument in which the writer contended, (and subsequentlv proved by experiment) that, with less than half-an-hour’s explanation, he could get boys of fourteen to draw, as quickly as experts, bending moment diagrams for beams subject to moving to centrated loads. An engineer’s time should be too valuable for such work, which should come within the province of the ofice boy. W.G. Sheppard

Publish Date – 1 January 1923

The Structural Engineer

This number of the Journal marks a new era in the history of the Institution. First of all, it bears for the first time the new title of the Institution; and secondly the size, and, it is intended, the matter included, are both enlarged.

Publish Date – 1 January 1923

The Structural Engineer

In calculating the strength of plated rolled or built up sections it is usual first to calculate the moment of inertia about the neutral axis and then divide by the distance of the neutral axis from the extreme fibre. W.A. Green

Publish Date – 1 January 1923

The Structural Engineer

The subject of this paper is the strength of rectangular slabs, but it is limited to such slabs as have an appreciable thickness coinpared with the span, and more particularly it is limited to slabs of reinforced concrete only. A. Ingerslev

Publish Date – 1 January 1923