The Structural Engineer > Archive > Volume 57 (1979) > Issues > Issue 16 > Black Bolts Under Combined Tension and Shear
Name of File 3970-57-16.pdf cached at 12/12/2017 12:19:25 - with 8 pages. pdfPath: E:\k9.istructe.org\CMS\webtest\files\48\48d695ca-2538-47c8-9913-d35c972fdded.pdf. thumbPath: E:\k9.istructe.org\CMS\webtest\files\pdfthumbs\48d695ca-2538-47c8-9913-d35c972fdded_1.png. objDoc: 1 - True. objPreview.Log: . strFileName: 48d695ca-2538-47c8-9913-d35c972fdded_1.png

Members/subscribers must be logged in to view this article

Black Bolts Under Combined Tension and Shear

Until the introduction of Amendment AMD l787 in July 1975, BS 449 gave the steelwork designer no guidance concerning the ultimate or design load of a black bolt, when it is subjected to the combined effect of tension and shear forces. It was therefore unavoidable that different designers had their own 'design methods' for the purpose of checking such bolts. The work described in this paper was carried out with a view to providing the designer with information regarding the behaviour, response, and ultimate carrying capacity of black bolts subjected to varying tension-shear ratios. H. Shakir-Khalil and C.M. Ho