The Structural Engineer > Archive > Volume 79 (2001) > Issues > Issue 8 > Enhancement of the structural performance of glue laminated, homegrown Sitka spruce, using carbonfib
Name of File 75-79-8.pdf cached at 12/12/2017 14:34:08 - with 6 pages. pdfPath: E:\k9.istructe.org\CMS\webtest\files\33\33ab7708-1d4e-42ad-b27d-453b3d3eb3f1.pdf. thumbPath: E:\k9.istructe.org\CMS\webtest\files\pdfthumbs\33ab7708-1d4e-42ad-b27d-453b3d3eb3f1_1.png. objDoc: 1 - True. objPreview.Log: Font 'StoneSans-Semibold' was replaced by 'Helvetica-Bold'. Font 'StoneSans' was replaced by 'Helvetica'. Font 'StoneSans-Italic' was replaced by 'Helvetica-Oblique'. . strFileName: 33ab7708-1d4e-42ad-b27d-453b3d3eb3f1_1.png

Members/subscribers must be logged in to view this article

Enhancement of the structural performance of glue laminated, homegrown Sitka spruce, using carbonfibre-reinforced polymer

This paper reports on work carried out to develop a structural composite using homegrown timber. The overall objective of the work was to improve the structural performance of timber beams by laminating and incorporating fibre reinforcement, with the intention of substituting native timber for imported timber. The first part of the programme involved both theoretical analysis and laboratory-based experimental work, in order to identify suitable reinforcing materials and compatible adhesives. It was established that the most effective reinforcement was a pultruded unidirectional carbon fibre-reinforced polymer (CFRP) strip. The next part of the programme concentrated on the fabrication and testing of composite beams. This progressed from small-span beams to 3m-span laminated beams and then to 6m-long laminated beams fabricated in commercial workshop conditions. The investigation of the theoretical and experimental behaviour of these 6m beams is the main focus of this paper. For modest reinforcement ratios a considerable increase in both bending stiffness and ultimate load capacity has been achieved. In addition, the behaviour at ultimate load has been found to depend on the compressive behaviour of the timber and shows much improved consistency compared with the inherent variability of the non-reinforced Sitka spruce beams. J. R. Gilfillan, BSc(Eng), PhD The Queen’s University of Belfast S. G. Gilbert, BSc(Eng), PhD, CEng, MIStructE, MICE The Queen’s University of Belfast D. P. Russell, BEng, PhD Kirk McClure Morton (formerly The Queen’s University of Belfast)