Concrete Design Guide. No. 5: How to calculate anchorage and lap lengths to Eurocode 2

Author: The Concrete Centre

Date published

1 May 2015

Price

Standard: £9 + VAT
Members/Subscribers: Free

Back to Previous

Concrete Design Guide. No. 5: How to calculate anchorage and lap lengths to Eurocode 2

Concrete Design Guide. No. 5: How to calculate anchorage and lap lengths to Eurocode 2
The Structural Engineer
Author

The Concrete Centre

Date published

1 May 2015

Author

The Concrete Centre

Price

Standard: £9 + VAT
Members/Subscribers: Free

This article discusses how to calculate an anchorage and lap length for steel ribbed reinforcement subjected to predominantly static loading using the information in Section 8 of Eurocode 2. Coated steel bars (e.g. coated with paint, epoxy or zinc) are not considered. The rules are applicable to normal buildings and bridges.

Additional information

Format:
PDF
Pages:
8
Publisher:
The Institution of Structural Engineers

Tags

Concrete Design Guide Technical Issue 5

Related Resources & Events

The Structural Engineer
<h4>Concrete Design Guide. No. 6: Fire design of concrete columns and walls to Eurocode 2</h4>

Concrete Design Guide. No. 6: Fire design of concrete columns and walls to Eurocode 2

The design of concrete slabs and beams is not generally affected by fire design requirements. However, these can be a governing factor in the sizing of columns, particularly in multi-storey buildings. This article therefore concentrates on the guidance given in Eurocode 2 on the sizing of concrete columns for different fire resistance periods.

Date ‐ 1 June 2015
Author ‐ The Concrete Centre
Price ‐ £9
The Structural Engineer
<h4>Concrete Design Guide. No. 1: Guidance on the design of liquid-retaining structures</h4>

Concrete Design Guide. No. 1: Guidance on the design of liquid-retaining structures

This short note highlights some of the salient aspects of the design and construction of liquid-retaining structures in reinforced concrete. The guidance is based on Eurocodes BS EN 1992-1-11 and BS EN 1992-32 and the corresponding UK National Annexes.

Date ‐ 5 January 2015
Author ‐ The Concrete Centre
Price ‐ £9
The Structural Engineer
<h4>Concrete Design Guide. No. 3: Eurocode 6: Design of masonry structures for lateral loads and other f</h4>

Concrete Design Guide. No. 3: Eurocode 6: Design of masonry structures for lateral loads and other f

The design for horizontal actions, fire and materials is considered, along with simplified methods of design. Throughout this article the Nationally Determined Parameters (NDPs) from the UK National Annexes have been used. These enable Eurocode 6 (BS EN 1996-1-1) to be applied in the UK.

Date ‐ 27 February 2015
Author ‐ The Concrete Centre
Price ‐ £9