A Graphical Method for Determining the Deflection of a Beam With Varying Moment of Inertia
Date published

N/A

First published: N/A

Price

Standard: £9 + VAT
Members/Subscribers: Free

Buy Now

Added to basket

Back to Previous

A Graphical Method for Determining the Deflection of a Beam With Varying Moment of Inertia

The Structural Engineer
A Graphical Method for Determining the Deflection of a Beam With Varying Moment of Inertia
Date published

N/A

First published

N/A

Price

Standard: £9 + VAT
Members/Subscribers: Free

Buy Now

In most cases of compound beams and built-up girders it is customary, in order to obtain an economical design, to vary the moment of inertia of the section throughout the length of the beam by curtailing the flange plates in accordance with the reduction of the B.M. at the respective sections. F.H. Thomas

Additional information

Format:
PDF
Publisher:
The Institution of Structural Engineers

Tags

Issue 5

Related Resources & Events

The Structural Engineer
Correspondence. All-Welded Machine Shop

Correspondence. All-Welded Machine Shop

To the EDITOR of The Structural Engineer. SIR,-A point which has been much stressed recently (namely, that all local authorities who have control over buildingshould be empowered to permit the use of welding in steel structures, subject to specified codes of practice), has again been brought to the notice of engineers, in the discussion which followed Mr. Helsby's paper.

Price - £9
The Structural Engineer
The Engineer as a Designer

The Engineer as a Designer

IN olden days there was little distinction between an engineer and an architect, and Leonardo da Vinci, for example, was the greatest engineer as well as the greatest architect of his time, but he probably would have been very surprised if anybody had attempted to separate these two functions of his activity. Oscar Faber

Author - Faber, Oscar
Price - £9
The Structural Engineer
The Design, Fabrication and Erection af a Small, All-Welded Machine Shop. Discussion on Mr. C. Helsb

The Design, Fabrication and Erection af a Small, All-Welded Machine Shop. Discussion on Mr. C. Helsb

MR. EWART S. AKDREU’S, B.Sc., M.1nst.C.E.. (Vice- President), proposing a very hearty vote of thanks to Mr. Helsby for his interesting paper, said he had read a number of papers on the subject of welding, but in this paper Mr. Helsby struck entirely new ground, and had given much interesting and helpful information. Presumably he had not considered it within the scope of the paper to state the relative costs of a riveted and a welded structure, but no doubt many members of the Institution would be very interested to have some information on that matter.

Price - £9