Mechanical Painting - III
Date published

N/A

First published: N/A

Price

Standard: £9 + VAT
Members/Subscribers: Free

Buy Now

Added to basket

Back to Previous

Mechanical Painting - III

The Structural Engineer
Mechanical Painting - III
Date published

N/A

First published

N/A

Price

Standard: £9 + VAT
Members/Subscribers: Free

Buy Now

Then as to mediums, the best results, certainly when covering large surfaces, are obtained with water or oil. Spirits are already volatile, and if super-aerated are apt to give trouble by too rapid or "spotty" drying. This is not so immediately felt when dealing with decorative or small work, but presents considerable drawbacks in rough work.

Additional information

Format:
PDF
Publisher:
The Institution of Structural Engineers

Tags

Issue 5

Related Resources & Events

The Structural Engineer
Annual Report for the Session 1923-24

Annual Report for the Session 1923-24

MEMBERSHIP THE present membership of the Institution of Structural Engineers, and its comparison with the figures for the two previous years, is shown in the following table:-

Price - £9
The Structural Engineer
Aluminious Cement in Practice

Aluminious Cement in Practice

UNDER the designation “Bauxite, or Aluminous Cement" may be grouped cements manufactured by burning in nearly equal proportions lime and bauxite until fusion, or almost until fusion, as the case may be. Such cements prepared by fusion are at present manufactured on a commercial scale by three firms : The Société Anonyme des Chaux et Cyinaents de Lafarge et du Teil, the originators of this new type of cement, who started experimenting as far back as 1897, took their patent in 1908, and reached the commercial stage in 1914, produce Ciment fondu (Registered Trade Mark) at le Teil (Ardèche) by use of a water-jacket, and Ciment Electro-Fondu (Registered Trade Mark) by use of the electric oven at Moutiers (Savoie). Yearly output about 50,000 tons. Mons. T.J. Guéritte

Author - Gueritte, T J
Price - £9
The Structural Engineer
The Viscosity of the Raw Material Slurry Used in the Manufacture of Portland Cement

The Viscosity of the Raw Material Slurry Used in the Manufacture of Portland Cement

ALTHOUGH this Conference is to deal chiefly with the properties and uses of cements we think that engineers and users of cement generally will be interested to receive some account of methods investigated by British Portland Cement Manufacturers, with the object of reducing the cost of manufacture, and so-of the utmost importance to the user-of reducing the cost of the finished cement. J.W. Christelow

Author - Christelow, J W
Price - £9