Open Discussion on The Kessock Bridge Design and Build Contract Procedures by Leslie Clements
Date published

N/A

First published: N/A

Price

Standard: £9 + VAT
Members/Subscribers: Free

Buy Now

Added to basket

Back to Previous

Open Discussion on The Kessock Bridge Design and Build Contract Procedures by Leslie Clements

The Structural Engineer
Open Discussion on The Kessock Bridge Design and Build Contract Procedures by Leslie Clements
Date published

N/A

First published

N/A

Price

Standard: £9 + VAT
Members/Subscribers: Free

Buy Now

In the United Kingdom most highway bridges go to tender with a fully detailed design, bill of quantities, and specification. Alternative designs are permitted but, with the limited tender periods and the complications of the independent structural check recommended by the Merrison Committee and required by the Department, these are rarely offered by tenderers. However, some contractors have advocated the adoption of continental contractural methods. Design and build tendering was adopted for the Kessock Bridge only because tender prices-firstly for foundations and secondly for the whole bridge-greatly exceeded the estimates.

Additional information

Format:
PDF
Publisher:
The Institution of Structural Engineers

Tags

Opinion Issue 12

Related Resources & Events

The Structural Engineer
Correspondence on Moment Transfer and the Ultimate Capacity of Slab Column Structures by A.E. Long,

Correspondence on Moment Transfer and the Ultimate Capacity of Slab Column Structures by A.E. Long,

In this paper some important conclusions are drawn from a limited number of 1/3 scale tests. Some of these are dependent on the use of a scale factor, which the authors took as ƒÄ = 1.2 when comparing their test results on a 62 mm thick model with calculations of shear capacity to CP 1 10. This should be 1.3 for 150 mm slabs according to Table 14 in the February 1976 Amendment to CP 110. Furthermore, this table is applicable only to the practical range of slab thickness down to 150 mm. The relevant scale law from beam test results (4ãh) would indicate that a ƒÄ value of 1.5 is appropriate for 62 mm slabs. Thus the 25% increase in ultimate shear stress proposed in the paper corresponds to the effect of neglecting the scale factor difference between 62 mm and 150 mm slabs. S.G.S. Feneron The importance of the slab/column connection

Price - £9
The Structural Engineer
Open Discussion on Anything you can do?... Towards a More Efficient Industry by S.B. Tietz

Open Discussion on Anything you can do?... Towards a More Efficient Industry by S.B. Tietz

Mr. W. J. Mackenzie (Slough Estates Ltd): The company I represent is a major customer of the building industry. Furthermore, being a repeat customer, it is rather more discerning and critical than many of the one-time buyers who come to the profession and to the industry for a building. We have, for some time, felt dissatisfied with the performance of the industry. The company is paying more and waiting longer for buildings, and the resulting product is inferior to what can be bought overseas, as regards both specification and aesthetics. The general standard of buildings on industrial estates around the country is poor and compares unfavourably with standards elsewhere in the world. It is essential for the customer to demand higher performance and to express his dissatisfaction.

Price - £9
The Structural Engineer
Discussion on The Resistance of Brickwork to Lateral Loading by B.A. Haseltine, H.W.H. West, H.R. Ho

Discussion on The Resistance of Brickwork to Lateral Loading by B.A. Haseltine, H.W.H. West, H.R. Ho

Mr. Tutt reported that further results were now available. These were for 215 mm thick walls, similar in size and shape to those already reported, and for 'C' shape walls, i.e. walls supported on both horizontal edge and one vertical edge. These new results are given in Table 1.

Price - £9