A study of Epoxy Resin Adhesive Joints in Shear
Date published

N/A

First published: N/A

Price

Standard: £9 + VAT
Members/Subscribers: Free

Buy Now

Added to basket

Back to Previous

A study of Epoxy Resin Adhesive Joints in Shear

The Structural Engineer
A study of Epoxy Resin Adhesive Joints in Shear
Date published

N/A

First published

N/A

Price

Standard: £9 + VAT
Members/Subscribers: Free

Buy Now

The structural performance of four epoxy adhesives has been studied, when subjected to shear in three types of specimen: a steel-steel doublelap specimen, a concrete prism with scarfed joint, and a concrete beam with external steel plate rein forcement. Specimens have been tested under simple and sustained static load, and in fatigue. Cured between 20 °C and 80 °C, the shear strength of adhesion to steel was generally at least 13 N/mm to the power 2, provided that the steel was free from grease, and was not greatly affected by slight contamination with rust, dust or moisture, or by cycling 400 times between - 7 °C and + 35 °C. There was a marked difference in performance of the different adhesives after immersion in water for 8 weeks. A.R. Cusens and D.W. Smith

Additional information

Format:
PDF
Publisher:
The Institution of Structural Engineers

Tags

Issue 1

Related Resources & Events

The Structural Engineer
Arbitration Act 1979

Arbitration Act 1979

The paper outlines the changes in arbitralprocedure brought about by the Arbitration Act 1979. These alter the appellate procedure, strengthen the arbitrator’s powers at the interlocutory stage of a reference, and introduce the facility of excluding judicial review in certain circumstances. The consequences for the structural engineer as litigant, expert witness, or arbitrator are discussed. Kenneth Severn

Price - £9
The Structural Engineer
Verulam

Verulam

The Watt Committee on Energy is seeking to extend its activities through increased education of both the professional and the layman; its chairman, Mr. J. H. Chesters, has asked for our support in furthering this campaign which is described in a statement that runs: Professional institutions have always had as their main objective the maintenance of high standards within their own particular field. It is now suggested that they should consider how energy conservation can be further extended through their own field of training. Verulam

Price - £9
The Structural Engineer
Discussion on The use of Simplified Methods in CP 110 - is Rigour Necessary by A.W. Beeby and H.P.J.

Discussion on The use of Simplified Methods in CP 110 - is Rigour Necessary by A.W. Beeby and H.P.J.

Mr. E. W. Bunn (F) (GLC): As a member of the CP 110 Code drafting committee, I felt that, in some respects, the conclusions reached in the paper could be said to reflect on the work of the committee. The paper concludes by saying that a Code should not be a repository for all the latest, most complex and fashionable methods of calculation. It should define the effort that is necessary and sufficient for the satisfactory design of normal structures. I fully support this view, and this is what we intended to do in CP 110. But drafting took place in the period after Ferrybridge, Ronan Point, and various other happenings, and therefore there was a tremendous insistence from the Official Inquiries set up, and from engineers in general, that there should be a more fundamental approach to design. This encouraged the adoption of the limit-state method and introduced the concept that the design method used should give as accurate a representation of actual behaviour as is practicable. This is all set out in section two of the Code as a statement of objectives and general recommendations, i.e. the philosophy of design.

Price - £9