The Spire of Dublin

Author: Deavy, Cormac P;Allsop, Andrew;Jones, Keith

Date published

N/A

Price

Standard: £9 + VAT
Members/Subscribers: Free

Buy Now
Back to Previous

The Spire of Dublin

The Structural Engineer
The Spire of Dublin
Date published

N/A

Author

Deavy, Cormac P;Allsop, Andrew;Jones, Keith

Price

Standard: £9 + VAT
Members/Subscribers: Free

Buy Now
Author

Deavy, Cormac P;Allsop, Andrew;Jones, Keith

The Spire of Dublin, described as the largest monument in the world, is 120m tall, 3m diameter at the base tapering to a point at the pinnacle, and is fabricated from shot-peened stainless steel. The simplicity of the structural form belies the complexity of the engineering design.

There are many interesting features in the design of this slender monument including the approach to material selection, wind engineering and vortex shedding, damping, fatigue and construction. This paper describes the design and construction of the Spire.

Cormac P. Deavy, BE, CEng, MIStructE, FIEI, MICE
Arup

Andrew Allsop, MA(Cantab), MESc, CEng, MICE, FWES
Arup

Keith Jones, BEng, CEng, MIStructE
Arup

Additional information

Format:
PDF
Publisher:
The Institution of Structural Engineers

Tags

Issue 16

Related Resources & Events

The Structural Engineer
<h4>Irish masonry</h4>

Irish masonry

Price - £9
The Structural Engineer
<h4>Headway modelling for traffic load assessment of short to medium span bridges</h4>

Headway modelling for traffic load assessment of short to medium span bridges

Site-specific assessment of the loading to which existing bridges are subject has considerable potential for saving on rehabilitation and replacement costs of the bridge stock. Monte Carlo simulations, with traffic measurements from site, are used to estimate the characteristic values for load effects. In this paper, it is shown that the critical loading events from which the characteristic effects are derived, are strongly dependent on the assumptions used for the headways of successive trucks. A new approach which uses measured headway statistical distributions is developed and is shown to be a reasonable balance between conservative assumptions and less realistic scenarios. The sensitivity of characteristic load effects to conventional headway assumptions is shown to be significant. Eugene J. Obrien, BE, MEngSc. PhD, CEng, FIEI, MIStructE Department of Civil Engineering, University College Dublin, Ireland Colin C. Caprani, BSc(Eng), DipEng, MIEI, MIABSE Department of Civil Engineering, University College Dublin, Ireland

Author - O'Brien, Eugene J;Caprani, Colin C
Price - £9
The Structural Engineer
<h4>Verulam</h4>

Verulam

Price - £9