Author: Sparkes, F N
First published: N/A
Standard: £9 + VAT
An IStructE account gives you access to a world of knowledge. Create a profile to receive details of our unique range of resources, events and training.
Added to basket
Sparkes, F N
The Railroad and Highway Bridge Across the Little Belt
AT the point of crossing, the little Belt (see map, Figure 1) is 2,700 ft. wide, the depth of water being 65 ft. near the shore and 130 ft. at mid-channel. The sea bed is a blue-green clay of extraordinarily dense and homogeneous composition; the deeper deposits are absolutely watertight and free from stone, which proved an important factor in the success of the foundation method adopted.
Professor Anker Engelund
The CHAIRMAN (Lt.-Colonel H. S. Rogers, C.M.G., D.S.O., M.I.Struct.E.) welcomed the large audience which filled the lecture hall and overflowed into the Council and Committee rooms on the ground floor (which had been connected by loud speakers with the microphone on the reading desk) and included representatives from the Home Office, the War Office, the Air Ministry, the London County Council and Scotland Yard, as well as the immediate past President of the Institution of Civil Engineers. He was highly gratified that so many had come to listen to the paper and it was evident that the subject which the lecturer was to deal with aroused widespread interest, amongst engineers. A telephone message had been received from Sir John Anderson (the Lord Privy Seal, and Minister for Civil Defence) expressing regret that a debate which was taking place at that moment in the House of Commons prevented his being present. He understood that Mr. Helsby had condensed his paper in order to allow time for a discussion, and he therefore introduced the lecturer without further preamble.
THE test was carried out on the portal frame girders for Kidlington Canal Bridge, Oxfordshire, by the staff of the Building Research Station, Garston, on behalf of the
Oxfordshire County Council. It took place at the Chepstow Works of the Fairfield Shipbuilding and Engineering Company, Limited, the makers of the girders. The object was to find out how far the thrust, stresses and deflections observed agreed with those calculated in the course of design. It is believed to have been the first test of its kind carried out.
J.J. Leeming and S.C. Redshaw