Computer Analysis of Reinforced Concrete Members and Foundations

Author: Alcock, D G

Date published

N/A

First published: N/A

Price

Standard: £9 + VAT
Members/Subscribers: Free

Buy Now

Added to basket

Back to Previous

Computer Analysis of Reinforced Concrete Members and Foundations

The Structural Engineer
Computer Analysis of Reinforced Concrete Members and Foundations
Date published

N/A

First published

N/A

Author

Alcock, D G

Price

Standard: £9 + VAT
Members/Subscribers: Free

Buy Now

The paper describes a general analysis of stress in short, reinforced concrete members having any shape in cross section and subject to any combination of bending moments and axial load. Soil pressures under spread footings may also be determined. All materials are assumed to behave elastically when in compression but only the steel reinforcement can carry tension. Stability, torsion and shear are not considered. The analysis is iterative and can be carried to any required accuracy. The means of programming the analysis for a computer are described and the use of an existing program is illustrated. D.G. Alcock

Additional information

Format:
PDF
Publisher:
The Institution of Structural Engineers

Tags

Issue 9

Related Resources & Events

The Structural Engineer
The President 1967-68

The President 1967-68

Mr. Brian Scruby, CEng, MIStructE, MICE, will take office as President of the Institution 1967-68 on 5 October and will give his Presidential Address at a meeting at 6 o’clock that evening at 11 Upper Belgrave Street, London SW1. George Frederick Brian Scruby was born in 1912 and for the past 50 years has lived in the Sutton and Cheam area of Surrey. Essentially a practical engineer, Mr. Scruby attended Wimbledon Junior Technical College until 1927 and, by parttime studies, first at Wimbledon Technical College and later at Borough Polytechnic, prepared for the Institution’s examinations. He became a Graduate in 1935 and an Associate Member in 1937. He transferred to full Member in 1944.

Price - £9
The Structural Engineer
The Design and Construction of a Precast Concrete Multi-Storey Factory Extension. Discussion on the

The Design and Construction of a Precast Concrete Multi-Storey Factory Extension. Discussion on the

Mr. F. C. Mellor: ' The paper emphasizes the importance of the team-work between consultant and contractor. We at St. Albans Concrete were very grateful for the opportunities that we were given for very frank discussion at all stages, which enables a well-balanced design to be prepared and which took very full account of the manufacturing aspects. '

Price - £9
The Structural Engineer
The Design of Two Buildings with Suspended Structures in High Yield Steel. Discussion on the paper b

The Design of Two Buildings with Suspended Structures in High Yield Steel. Discussion on the paper b

The Chairman: ' We are indebted to Mr. Williams and Mr. Rutter for their practical and informative paper. The authors have taken account of forces which only ten or 20 years ago would have been discussed only in a university laboratory. They have had concern with deflection which until quite recently was quite unthinkable. I think this is a sign of things to come, both in concrete and in steel. We are going to have to know things very much more, we are going to have to know very much more about the behaviour under working conditions as soon as we go over to what is known as the limit state method of design. '

Price - £9