Correspondence on A Numerical Solution for Non-prismatic Beams with Arbitrary Transverse Loading and
Date published

N/A

Price

Standard: £10 + VAT
Members/Subscribers: Free

Back to Previous

Correspondence on A Numerical Solution for Non-prismatic Beams with Arbitrary Transverse Loading and

Tag
Author
Date published
N/A
Price

Standard: £10 + VAT
Members/Subscribers: Free

The Structural Engineer
Citation

The Structural Engineer, Volume 52, Issue 3, 1974

Date published

N/A

Citation

The Structural Engineer, Volume 52, Issue 3, 1974

Price

Standard: £10 + VAT
Members/Subscribers: Free

Having studied the paper by Mr. T. J. Kotas it is considered that his approach, whilst correct, is far too complicated. All the problems solved can be approached much more simply as follows...

Professor J.W.H. King

Additional information

Format:
PDF
Publisher:
The Institution of Structural Engineers

Tags

Opinion Issue 3

Related Resources & Events

The Structural Engineer
<h4>Torsion in Concrete and CP110 1972</h4>

Torsion in Concrete and CP110 1972

The strength of a concrete member subjected to torsion will be governed by the tensile strength of the concrete. The author has collected all the experimental data available on concrete in torsion and shows that the results agree reasonably well with this statement if the split cylinder strength is taken as the tensile strength of the concrete. W.T. Marshall

Price – £10
The Structural Engineer
<h4>The Martigues Viaduct</h4>

The Martigues Viaduct

The Martigues Viaduct was begun in 1969 and came into operation in June 1972. It is 874 m in length and consists of a central metal structure framed by two access viaducts in prestressed concrete. The reasons why a bridge was considered necessary are given, followed by details of its construction. Claude Poirson

Price – £10
The Structural Engineer
<h4>Residual Stresses and their Influence Upon the Lateral Buckling of Rolled Steel Beams</h4>

Residual Stresses and their Influence Upon the Lateral Buckling of Rolled Steel Beams

The effects of residual stresses on the inelastic buckling of rolled, I-section steel beams are studied using a numerical technique to predict the stiffness of the partially yielded section. Both idealized and measured residual stress patterns are employed and a variety of different sections and grades of steel are considered. Some attention is also given to the effect upon inelastic lateral buckling of the type of variation in material properties likely to be encountered in practice. General conclusions regarding the influence of residual stresses on beam buckling are drawn and improvements to Nethercot's simple method for estimating inelastic buckling strength described. D.A. Nethercot

Price – £10