Correspondence on The Behaviour of Full-Scale Steel-Framed Buildings Subjected to Compartment Fires
Date published

N/A

Price

Standard: £10 + VAT
Members/Subscribers: Free

Back to Previous

Correspondence on The Behaviour of Full-Scale Steel-Framed Buildings Subjected to Compartment Fires

Tag
Author
Date published
N/A
Price

Standard: £10 + VAT
Members/Subscribers: Free

The Structural Engineer
Citation

The Structural Engineer, Volume 78, Issue 3, 2000

Date published

N/A

Citation

The Structural Engineer, Volume 78, Issue 3, 2000

Price

Standard: £10 + VAT
Members/Subscribers: Free

Mr W. Parlor (Fire Safety Development Group)
We read the ‘preliminary conclusions’ of the paper with avid interest, and must again express our alarm at the lack of definition of these conclusions.

Additional information

Format:
PDF
Publisher:
The Institution of Structural Engineers

Tags

Opinion Issue 3

Related Resources & Events

The Structural Engineer
<h4>Verulam</h4>

Verulam

Mezzanine Floors Two more contributors have joined this discussion. Richard Harris writes from Bournemouth: I have read with interest the recent correspondence on mezzanine floor structures and the effective lengths of their columns. For some years, I have been refusing to accept a factor of 1.5 for unbraced frames. The designers are always unable to justify the figure. Occasionally, when an impasse is reached, I visit the site. Surprisingly, even when there appears to be no adjacent supporting structure according to the plans, there is often actually something robust enough to provide lateral restraint, bringing the effective length down below 1.0. I suspect that this, and vigilance by building control bodies, is an important factor in preventing collapse.

Price – £10
The Structural Engineer
<h4>Computer-Based Structural Design and Conformance Checking</h4>

Computer-Based Structural Design and Conformance Checking

Every structural design should be produced in accordance with, and checked for conformance against, the appropriate standards. The term ‘standards processing’ is commonly used to describe this process. This paper presents a hybrid environment for automated standards-processing, named ‘SADA’: standards automated design assistant. One objective of the SADA environment is to overcome the drawbacks commonly associated with standards processing and currently available, commercial computer packages presently employed to facilitate standards processing. The functionality of existing packages is discussed, the focus of this discussion being the application of these tools to standards conformance checking. Illustrative examples of the SADA environment are then presented, demonstrating its ability to overcome drawbacks associated with standards documentation and existing packages. A.I. Thompson, B. Kumar and Professor I.A. MacLeod

Author – Thomson, A I;Kumar, B;MacLeod, I A
Price – £10
The Structural Engineer
<h4>Computer Toolkit for Small Consultancies</h4>

Computer Toolkit for Small Consultancies

The project reported in this paper started with the desire to identify a low-cost computer-based ‘toolkit’ that would assist small consultants in their day-to-day work. The title refers to ‘numerically challenged’ consultants who operate either as sole engineers or, at most, with one or two assistants. John Seifert, Peter Gardner and John Gay

Author – Seifert, John;Gardner, Peter;Gay, John
Price – £10