The Inspection and Testing of Strucutral Materials
Date published

N/A

Price

Standard: £10 + VAT
Members/Subscribers: Free

Back to Previous

The Inspection and Testing of Strucutral Materials

Tag
Author
Date published
N/A
Price

Standard: £10 + VAT
Members/Subscribers: Free

The Structural Engineer
Citation

The Structural Engineer, Volume 2, Issue 4, 1924

Date published

N/A

Citation

The Structural Engineer, Volume 2, Issue 4, 1924

Price

Standard: £10 + VAT
Members/Subscribers: Free

“Inspection to be final, as no responsibility can be accepted for such materail after it has left the sellers’ works. Where testing or inspection has to be done, the buyer must make the necessary arrangements for this to be carried out as soon as possible after receipt of ndotice that the material has been rolled. All bars from which test pieces have been taken must be accepted by the buyers if complying with the specification of tests. For material under 5/16 in. thick, bend test only will be given in accordance with the British standard specification for such material.”

H.J. Davey

Additional information

Format:
PDF
Publisher:
The Institution of Structural Engineers

Tags

Issue 4

Related Resources & Events

The Structural Engineer
<h4>Tintern Abbey. A Record of Repairs Executed Since 1913 Under the Direction of H.M. Office of Works.</h4>

Tintern Abbey. A Record of Repairs Executed Since 1913 Under the Direction of H.M. Office of Works.

A TRUE record of the repairs of Tintern Abbey will not fail to indicate that a very great advance in the scientific analysis, understanding and treatment of ancient monuments was made possible by cxpericnce as the work progressed, and that as the result of this fuller knowledge certain expedients were adopted in the later stages of the work which would have been considered absolutely beyond the scope of the conservator’s art at the commencement of operations. William Harvey

Author – Harvey, William
Price – £10
The Structural Engineer
<h4>The Strength of Concrete; Its Relation to the Cement, Aggregates and Water. - Part III</h4>

The Strength of Concrete; Its Relation to the Cement, Aggregates and Water. - Part III

IV. Mortar Voids and Water Content, The magnitude of the voids and its change with additions of water will depend upon the gradation of the particles of F.A., each A. having its own individuality. J. Singleton-Green

Price – £10
The Structural Engineer
<h4>The Roofing of Factories</h4>

The Roofing of Factories

THE satisfactory roofing of large areas has always been a problem presenting somewhat additional difficulties to the engineer. All the customary essentials with regard to a roof are present, viz., that it should be water-tight, be as inexpensive to keep in repair as possible, and that it should have a good appearance, but there is added to these requirements, if anything, the more important one that the material used for covering must be light. In the past, for this purpose, galvanised iron has been possibly most used, but of recent years cement which is entering into so many of our building products, has been combined with asbestos and a new roofing material is now becoming the vogue.

Price – £10