Design and Construction of the Ness Bridge

Author: Allen, A C

Date published

N/A

First published: N/A

Price

Standard: £9 + VAT
Members/Subscribers: Free

Buy Now

Added to basket

Back to Previous

Design and Construction of the Ness Bridge

The Structural Engineer
Design and Construction of the Ness Bridge
Date published

N/A

First published

N/A

Author

Allen, A C

Price

Standard: £9 + VAT
Members/Subscribers: Free

Buy Now

The Ness Bridge carries route A9 as a 44-ft carriageway and two 9-ft footways across the River Ness in Inverness and it was designed to carry 45 units of HB Ministry of Transport loading. The bridge has three spans giving a total length of 253 ft and the centre span of 120 ft has a 60-ft suspended span between cantilevers. A.C. Allen

Additional information

Format:
PDF
Publisher:
The Institution of Structural Engineers

Tags

Issue 6

Related Resources & Events

The Structural Engineer
Column Buckling Loads by the Conjugate Beam Method

Column Buckling Loads by the Conjugate Beam Method

The paper deals with the approximate analysis of elastic columns and beam-columns by the conjugate beam method (CBM). It is shown that in many cases the method yields results very quickly and with a good degree of accuracy. Aron Zaslavsky

Author - Zaslavsky, Aron
Price - £9
The Structural Engineer
Structural Codes of Practice. CP 114 : The Structural Use of Reinforced Concrete in Buildings (1965

Structural Codes of Practice. CP 114 : The Structural Use of Reinforced Concrete in Buildings (1965

CP 114 : The Structural Use of Reinforced Concrete in Buildings (1965 edition) The revision of the 1957 edition of CP 114 was first suggested to the Institution of Structural Engineers, the convening institution, by the British Standards Institution in November 1961. This request followed representations made to the Codes of Practice for Building Committee by the Reinforced Concrete Association and the Cement and Concrete Association. M.E. Habershon, W. Hunter Rose and O.A. Kerensky

Price - £9
The Structural Engineer
Aeronautics and the World of Engineering Strucutres. Discussion on the paper by Sir Alfred PugsleyOB

Aeronautics and the World of Engineering Strucutres. Discussion on the paper by Sir Alfred PugsleyOB

The Chairman, after thanking Sir Alfred for his paper, commented on the apparent time-lag, due to matters of military secrecy and commercial interests, between the solution of aeronautical problems and publication. There seemed in this respecto be an essential difference between aeronautical engineering and ordinary civil structural engineering, where there had always been a tradition of publishing the results of investigations as soon as they were done.

Price - £9